How often is the drive axle of a cleaning vehicle maintained?

How often is the drive axle of a cleaning vehicle maintained?
As an important part of urban sanitation, the maintenance frequency of the drive axle of a cleaning vehicle is crucial to ensuring vehicle performance and extending its service life. According to industry standards and practical experience, the following is the recommended maintenance frequency of the drive axle of a cleaning vehicle:

Initial maintenance:
Before using a new vehicle, an appropriate amount of gear oil must be added to the main reducer, 19 liters for the middle axle, 16 liters for the rear axle, and 3 liters for each side of the wheel reducer

A new vehicle must be run-in for 1500 km, the brake clearance must be readjusted, and the fasteners must be rechecked before it can be officially put into use

Daily maintenance:
Every 2000 km, add 2# lithium-based grease to the grease fittings, clean the vent plug, and check the gear oil level in the axle housing

Check the brake clearance every 5000 km

Regular inspection:
Every 8000-10000 km, check the tightness of the brake base plate, the looseness of the wheel hub bearing, and the brake Check the wear of the brake pads. If the brake pads exceed the limit pit, the brake pads need to be replaced.
Apply grease to the four places between the leaf spring and the slide plate every 8000-10000km.

Inspection of oil level and quality:
The first oil change mileage is 2000km. After that, the oil level needs to be checked every 10000km. Refill at any time.
Replace the gear oil every 50000km or every year.

Inspection of the oil level of the middle drive axle:
After the oil of the middle drive axle is filled, stop the car after driving 5000km and check the oil level again to ensure the oil level of the drive axle, the axle box and the inter-bridge differential.

In summary, the maintenance frequency of the drive axle of the cleaning vehicle is usually based on the mileage, covering from initial maintenance to daily maintenance, regular inspection, and inspection of oil level and quality. These maintenance measures help ensure the reliability and safety of the cleaning vehicle under various operating conditions.